loading
| Availability: | |
|---|---|
| Quantity: | |
◆◆ Product Advantage
1. Superior Power & Intelligent Drive System for Efficient and Stable Operation
Our Electric Pallet Truck is equipped with an advanced AC drive motor, delivering smooth and powerful performance with a maximum travel speed of up to 6.5 km/h when unloaded. Its intelligent micro-control system accurately senses load changes and automatically adjusts power output, ensuring optimal operating efficiency and stability whether fully loaded at 2.5 tons or under light loads. Compared to older DC motors, energy efficiency is increased by up to 25%, supporting up to 8 hours of continuous high-intensity operation on a single charge, perfectly meeting the demands of a full shift in logistics warehouses.
2. Ergonomic Low-Fatigue Design for Enhanced Operator Comfort
Focusing on operator comfort and safety, this product features an ergonomically designed multi-function control handle with intuitive thumb switches (forward/reverse, horn) and a clear LCD display. The adjustable handle requires less than 3N of force to steer, significantly reducing wrist and arm fatigue during prolonged use. The optimized chassis and spacious operator platform provide a stable and comfortable working environment, boosting operator productivity by over 15% during long-distance travel.
3. Robust Chassis Construction for Extended Service Life
The core chassis structure is manufactured from high-strength steel and has undergone rigorous impact and fatigue tests, ensuring reliability even in harsh industrial environments. The forks are reinforced for superior load-bearing capacity and resistance to deformation. High-quality polyurethane load wheels and drive wheels are not only wear-resistant and non-marking but also offer a service life approximately 50% longer than standard rubber wheels, effectively reducing long-term maintenance and replacement costs for users.
4. Comprehensive Safety Features & Intelligent Diagnostic System
Safety is our top priority. This truck is equipped with multiple safety mechanisms, including an emergency power-off switch, dual mechanical and electronic braking systems, and crucial overload protection. If a load exceeds the rated capacity, the system automatically inhibits lifting and triggers audible and visual alarms. The built-in intelligent diagnostic system continuously monitors the status of key components. If an abnormality is detected (e.g., motor overheating, circuit fault), it immediately displays an error code on the screen for quick troubleshooting and repair, minimizing downtime.
5. Easy Maintenance & Excellent Economical Performance
A modular component design simplifies daily maintenance, allowing for quick inspection and replacement of core components like the battery and controller. The high-performance lithium battery pack supports opportunity charging (charge as needed) with no memory effect, significantly enhancing convenience and battery lifespan. When considering its energy efficiency, low maintenance needs, and long-term durability, this electric pallet truck can help customers reduce overall operating costs by more than 30% over three years.
◆◆ Technical Parameters
| MODEL | HAND PALLET TRUCK |
| Load Capacity | 1T, 1.5T, 2T, 2.5T, 3T, 5T, 10T |
| Fork Dimensions | 1150×550mm, 1220×685mm |
| Lowered Height | 50 - 85 mm |
| Lift Height | 85 - 200 mm |
| Pump Strokes | 30 - 40 pumps |
| Net Weight | 65 - 75 kg |
| Wheel Material | Nylon, Polyurethane |
| Pallet Type | Stringer, Block pallets |
◆◆ Product Uses
1. Manufacturing Internal Logistics
In large manufacturing plants, the electric pallet truck serves as a critical link between production lines and storage areas. It swiftly transports raw materials from the warehouse to the line side and moves finished goods to temporary storage. With a minimum turning radius of only 1.6 meters, it navigates narrow aisles with ease, ensuring timely material supply and preventing production line stoppages.
2. Retail Warehousing Efficient Order Picking
In e-commerce warehouses or retail distribution centers, the electric pallet truck is an ideal tool for order picking. Operators can effortlessly maneuver it between shelves to quickly and effortlessly pick and replace multi-category goods, significantly boosting order processing efficiency, especially for high-frequency "goods-to-person" operations.
3. Reliable Performance in Cold Chain Environments
Models specifically designed for cold storage environments (below -25°C) ensure stable operation in extreme cold. Metal components are treated for frost resistance, and rubber and hydraulic systems are adapted to low temperatures, enabling safe and efficient handling of temperature-sensitive goods like food and pharmaceuticals, eliminating quality risks due to equipment failure.
4. Rapid Transfer at Loading Docks
At loading docks in ports or logistics parks, electric pallet trucks work in coordination with forklifts to achieve seamless "truck-dock-warehouse" transfer. Their rapid movement capability significantly reduces truck waiting times at the dock, accelerating cargo turnover and is key to improving dock throughput efficiency.
5. Flexible Application in Confined Spaces
The compact design of the electric pallet truck shines in extremely space-limited scenarios like warehouse bulk areas, inside containers, or aircraft cargo holds. It can easily enter and perform cargo stacking and moving, solving the challenge of larger equipment being unable to access these spaces, thus maximizing space utilization.
◆◆ Product Operate Guide
Operating our hand pallet truck is designed for maximum ease. First, fully insert the forks into the pallet, ensuring the load is centered. To lift, simply pump the hydraulic lever up and down until the load is clear of the ground. Then, pull the control handle to move the truck; the built-in ball bearing system ensures smooth maneuvering even with heavy loads. To lower, gently turn the release knob on the handle. Always store with the forks fully lowered. For a detailed safety checklist and maintenance tips, download our complete guide.
◆◆ FAQ
1.Q: Will occasional overloading damage the equipment?
A: Overloading is strictly prohibited! Even 10% excess can deform hydraulic cylinders or rupture seals. Always stay ≤ rated capacity with a 10% safety margin.
2.Q: Hydraulic system failure in cold environments (cold storage)?
A: Use freezer-spec models (labeled "Freezer") with -30°C hydraulic oil. Standard units freeze below 0°C – forcing operation damages seals.
3.Q: Forks won’t lift or descend slowly after lifting?
A: Troubleshoot:
Check hydraulic oil level (refill to mid-level of sight glass)
Ensure release valve is fully closed (turn clockwise)
Inspect cylinder for leaks (replace seals if leaking)
4.Q: Steering wheels jam when pushing/pulling?
A: Usually debris (plastic/threads) tangled in axles. Clear obstructions immediately. Apply grease monthly. Replace worn wheels with same-spec polyurethane wheels.
5.Q: Key precautions for slope operation?
A:Uphill: Push forward with load on lower side
Downhill: Pull backward while bracing handle against body
Never operate on slopes >3% (≈1.7°)!
6.Q:Preventive Tips?
A:Monthly: Check oil level
Annually: Replace seals
Always store forks fully lowered to prevent hydraulic stress.
Buying an electric pallet truck? Uncover hidden lifecycle fees, compare lithium vs lead-acid batteries, and avoid costly procurement mistakes.
Eliminate warehouse bottlenecks and manual lifting fatigue. Discover how the right electric pallet truck boosts throughput, safety, and ROI.
Forklift or electric pallet truck? Eliminate bottlenecks by matching the right material handling equipment to your warehouse workflow and space.
Choosing between electric and manual chain hoists? Prevent costly specification errors by comparing duty cycles, costs, and safety in this guide.
Maximize warehouse throughput. Learn how to select the right electric pallet truck by evaluating load realities, duty cycles, and battery types.
Avoid liability & OSHA fines. Learn proper chain hoist inspection intervals: daily to annual, based on service class, per ASME B30.16. Stay safe.
Stop guessing chain hoist capacity. Use this method: add 25% safety margin, factor rigging weight, and match duty cycles for safe, efficient lifting.
Discover safe manual chain hoist setup steps, pre-lift tests, and compliance tips to prevent catastrophic load drops and ensure workplace safety.
Calculate lift height for manual chain hoists with our guide. Prevent dangerous tail chain hazards. Ensure OSHA-compliant rigging. Order correctly.
Stop risking safety with wrong chain hoist specs. Calculate true load, duty cycles, & ensure compliance. Expert guide.
Master electric pallet truck safety and operations. Learn essential SOPs, daily checks, and key features to prevent accidents and boost efficiency.
Maximize electric pallet truck battery life. Compare lead-acid vs. lithium-ion runtimes, lifespans, and maintenance to prevent costly downtime.
Reduce operator fatigue and boost warehouse efficiency with the right electric pallet truck. Learn to select models, battery types, and capacity.
Confused by electric pallet truck jargon? Learn to choose the right walkie, rider, or stacker to maximize warehouse efficiency and boost ROI.
Is a powered pallet truck legally a forklift? Yes. Learn OSHA classifications, mandatory training, and key differences to avoid costly fines.
Industrial lifting carries immense high-stakes realities. Choosing the wrong lifting equipment exposes operations to severe payload damage, strict regulatory penalties, and catastrophic safety failures.
Synthetic rigging drives modern material handling across construction, manufacturing, and logistics. Within this demanding field, the Type 3 flat eye-and-eye configuration stands out as the industry’s default workhorse. It balances immense lifting power and everyday practicality.
Selecting the right lifting sling goes far beyond merely checking a weight capacity chart. It represents a critical safety and operational efficiency decision shaping your entire Total Cost of Ownership (TCO).
Lifting massive industrial loads leaves zero room for error. Selecting the wrong lifting sling doesn't just risk operational downtime. It introduces catastrophic safety liabilities and inflates equipment replacement costs instantly.
While the "3-3-3 rule" recently trended across various fitness platforms, it holds a drastically different meaning in industrial material handling. In the high-stakes environment of industrial lifting, it represents a non-negotiable operational safety and rigging framework.
